Why Precision AR-10 Rifles Dominate Long-Range Shooting

The AR-10 platform has earned its place as the preferred choice for long-range shooters across hunting, competition, and tactical applications. At Beal Rifle Company, we build every precision AR-10 to deliver sub-MOA accuracy at distances where factory rifles struggle to maintain consistency. Our Fort Worth, Texas, facility machines and assembles each rifle by hand, applying the same attention to detail that defined military armories for generations.

Shooters who buy AR-10 rifles often discover that factory options fall short of their accuracy expectations. Mass-produced rifles balance manufacturing speed against quality, resulting in acceptable but unremarkable performance. A custom AR-10 built to individual specifications changes the equation entirely. Match-grade barrels, hand-fitted receivers, and precision triggers combine to produce rifles capable of consistent hits at 800 yards and beyond.

The AR-10 Platform Advantage for Distance Shooting

Eugene Stoner designed the AR-10 in 1955 as a battle rifle chambered in 7.62×51mm NATO. The platform’s direct impingement gas system and inline stock design reduced felt recoil compared to traditional rifles of the era. These characteristics made the AR-10 accurate and controllable despite firing a full-power cartridge.

Modern long-range AR-10 rifles are built on Stoner’s foundation with upgraded materials and manufacturing techniques. The platform accepts barrels from 16 to 24 inches, allowing builders to optimize velocity and accuracy for specific applications. Free-floating handguards eliminate barrel contact during firing, while adjustable gas blocks fine-tune cycling for different ammunition loads.

Why Serious Shooters Choose AR-10 Over Bolt Actions

Bolt-action rifles dominated precision shooting for decades. The AR-10 changed this dynamic by offering comparable accuracy with semi-automatic capability. NSSF reports that Modern Sporting Rifles (MSRs) made up about 48% of all rifles produced and imported (net of exports) in the U.S. in 2018, and estimates that about 19.8 million MSRs have been in circulation since 1990.

A precision AR-10 provides several advantages over bolt guns for practical applications. Follow-up shots arrive faster without breaking cheek weld or sight picture. Magazine capacity allows engagement of multiple targets during competition stages or hunting scenarios. The modular design permits rapid caliber changes through upper receiver swaps.

We build each long-range AR-10 around the shooter’s intended use. Our team works directly with customers to select barrel profiles, chamberings, and trigger specifications that match their shooting discipline. This customized approach delivers rifles optimized for specific performance requirements rather than general-purpose designs.

Chambering Options for Long-Range Performance

The AR-10 platform supports multiple cartridges suited for distance shooting. Each chambering offers distinct advantages depending on target type, range, and shooting conditions.

6.5 Creedmoor: The Long-Range Standard

The 6.5 Creedmoor has become the dominant choice for precision rifle competition and long-range hunting. Hornady introduced the cartridge in 2007 specifically for competitive shooting, designing it around optimum bullet performance at extended distances.

Ballistic advantages include high sectional density projectiles with excellent wind-bucking characteristics. The 6.5mm bullet diameter allows aerodynamic designs with low drag coefficients. Moderate recoil permits shooters to spot their own impacts through the scope, speeding up corrections for follow-up shots.

Beal Rifle Company chambers our BRC-10 Sentinel rifles in 6.5 Creedmoor with 24-inch carbon fiber barrels for maximum velocity and accuracy. This configuration delivers consistent performance beyond 1,000 yards for shooters with the skill to take advantage of it.

.308 Winchester: Proven Versatility

The .308 Winchester remains the most popular AR-10 chambering due to ammunition availability and proven performance. Military and law enforcement agencies worldwide adopted this cartridge, creating an extensive supply chain for both training and precision ammunition.

For hunters, .308 delivers sufficient energy for elk-sized game at ethical distances. The cartridge generates approximately 2,600 foot-pounds of muzzle energy with 168-grain match bullets, according to SAAMI published specifications. This energy level handles most North American big games within 400 yards.

Specialty Chamberings for Specific Applications

Custom AR-10 builds accommodate specialized cartridges beyond the mainstream options. The 22 Creedmoor provides a flat trajectory for varmint and predator hunting with minimal recoil. The .243 Winchester offers a moderate-recoil deer hunting option popular among youth hunters and recoil-sensitive shooters.

The 8.6 Blackout chambering pairs with 16-inch barrels for suppressed shooting applications. This relatively new cartridge pushes heavy subsonic projectiles at velocities optimized for sound suppressor performance while maintaining terminal effectiveness.

What Separates Custom AR-10 Builds from Factory Rifles

Factory AR-10 rifles ship with standardized components designed for acceptable performance across a broad customer base. Custom builds start with a blank slate, selecting every component based on the intended application and performance goals.

Barrel Selection and Specifications

The barrel determines the accuracy potential more than any other component. Beal Rifle Company sources match-grade barrels from domestic manufacturers using premium steel alloys. Button-rifled and cut-rifled options provide different characteristics suited to high-volume shooting or maximum accuracy.

Carbon fiber wrapped barrels reduce weight while maintaining the rigidity needed for consistent accuracy. A typical steel heavy barrel profile adds significant weight that affects field handling. Carbon fiber construction achieves similar accuracy with substantially reduced mass, benefiting hunters who carry their rifles across challenging terrain.

Barrel length affects velocity, accuracy, and handling characteristics. Our team helps customers balance these factors based on their shooting requirements. A long-range AR-10 built for benchrest competition benefits from 24-inch barrels, maximizing velocity. A hunting rifle built for mountain use might prioritize an 18-inch barrel for reduced weight and improved maneuverability.

Trigger Quality and Its Impact on Accuracy

Factory triggers typically break between 5 and 8 pounds with noticeable creep and overtravel. This heavy pull weight makes precise shot placement difficult, particularly under field conditions or time pressure.

We install CMC precision triggers with clean 2.5-pound breaks in our custom AR-10 builds. A quality trigger allows the shooter to release the shot without disturbing sight alignment. The difference between a factory trigger and a precision unit often accounts for measurable accuracy improvements.

Receiver Fit and Manufacturing Tolerances

Mass-produced receivers require manufacturing tolerances that permit interchangeability between components. This necessary variation creates slight movement between upper and lower receivers that affects accuracy under recoil.

Hand-fitting receivers eliminates this play by matching specific components to each other. The process requires additional time and skill but produces rifles with tighter lockup and improved consistency. Every BRC-10 leaves our Fort Worth facility with hand-fitted receiver sets.

Beal Rifle Company – Veteran Craftsmanship for Precision Shooters

Beal Rifle Company operates as a 100% Veteran-Owned and SBA-Certified Service-Disabled Veteran-Owned Small Business (SDVOSB). Our founder, Kelly Beal, established the company to build rifles meeting the standards he experienced during military service.

The team includes experienced gunsmiths and shooters who understand precision rifle requirements firsthand. This background informs every design decision, from component selection to assembly procedures. We build rifles we would stake our own lives on, then offer them to customers who demand the same level of performance.

Endorsements from Military Professionals

Our rifles have earned recognition from distinguished military professionals. Ranger Hall of Fame inductees, including Colonel (Ret) Shawn L. Daniel, Colonel (Ret) Michael Foster, CSM (Ret) Dennis Smith, and CSM (Ret) John Brady, endorse Beal Rifle Company products based on their extensive experience with precision firearms. CSM Smith, who served 27 years, including twenty years with the 75th Ranger Regiment, states that Beal Rifle Company firearms are among the best built and most accurate he has ever used.

Community Support and Partnerships

We maintain partnerships with organizations serving veterans and first responder families. Darby’s Warrior Support provides hunting and fishing opportunities to physically and emotionally injured post-9/11 Special Operations Combat veterans. 10-7 Outdoors offers trips to surviving families of Law Enforcement Officers killed in the line of duty.

We also offer discounts for Military, LEO, First Responders, and Teachers. These programs make custom AR-10 ownership more accessible to those who serve their communities and country.

The BRC-10 Sentinel: Purpose-Built for Long-Range Excellence

The BRC-10 Sentinel Collection represents our dedication to precision AR-10 performance. Each rifle is built around the specific needs of the buyer, whether for competition, hunting, or extreme long-range shooting.

Standard features include match-grade barrels, precision triggers, and Cerakote finishes for corrosion resistance. The signature Tiger Stripe pattern pays tribute to Special Operations Forces who served with distinction during the Vietnam War. This iconic camouflage symbolizes the bravery and resilience that inspire our craftsmanship.

Every BRC-10 Sentinel ships with a Limited Lifetime Warranty. This commitment reflects our confidence in both materials and workmanship. We stand behind every rifle we build for as long as you own it.

Customization Options

Shooters can configure their BRC-10 through our online system or by consulting directly with our team. Options include:

• Chambering selection (6.5 Creedmoor, .308 WIN, 22 Creedmoor, 8.6 Blackout, .243 WIN)
• Barrel length and profile specifications
• Handguard style and length
• Cerakote finish patterns, including Tiger Stripe designs
• Optics mounting solutions
• Muzzle device selection

How to Buy AR-10 Rifles from Beal Rifle Company

Shooters interested in a custom AR-10 in Fort Worth, TX, can begin the process through our website or by calling our team directly. We guide every customer through the configuration process to match rifle specifications with their intended applications.

Flexible Payment Options

We offer Buy Now, Pay Later financing through Credova. This option allows qualified buyers to spread payments over time while taking delivery of their rifle. Approval is subject to an eligibility check through Credova’s application process.

All purchases include FFL transfer through the buyer’s local dealer as required by federal law. Our customer service team assists with transfer coordination to make the process straightforward.

Build Your Long-Range Legacy with Beal Rifle Company

The precision AR-10 platform delivers performance that factory rifles cannot match. From match-grade barrels to hand-fitted receivers, every component choice affects accuracy at distance. Beal Rifle Company brings veteran craftsmanship and military-grade standards to every build, producing rifles worthy of the most demanding shooters.

Our BRC-10 Sentinel Collection represents years of refinement based on feedback from competitive shooters, hunters, and military professionals. We build each rifle individually at our Fort Worth facility, applying the attention to detail that mass production cannot replicate. The Limited Lifetime Warranty backs every rifle because we stand behind our work without reservation.

Shooters ready to buy an AR-10 in Fort Worth, TX, can contact us at (817) 888-3000 or [email protected]. Take advantage of Buy Now, Pay Later financing through Credova to get your custom AR-10 without waiting. Military, LEO, First Responders, and Teachers qualify for special discounts as our way of honoring those who serve. Our team is ready to help you configure a long-range AR-10 built to dominate at distance.